MEETING PROGRAM
*.pdf version of the tentative program you can download here!
*.pdf version of the program booklet you can download here!
FINAL PROGRAMME, TIMETABLE AND ORGANIZATION
Sept. 22, 2004
Arrival of participants, Registration. (The participants will report to a reception desk in the Donetsk Physics and Technology Institute of the National Academy of Sciences of Ukraine (DonPhTI), Donetsk and Hotel "Stariy Zamok", Sv'yatogorsk, Donetsk Region.)
To those participants who will go to the meeting by train from Moscow or Kharkiv direction it would be easier to go out from a train on "Sv'yatogorsk" railway station and reach his hotel by taxi. It should cost no more than 10 UAH (2 USD).
To those participants who will arrive to Donetsk and will need transfer from Donetsk to the Conference hotel it will be available shuttle busses departing to the conference hotel from Donetsk by following schedule:
1) 11:00 am: departure of the shuttle bus from DonPhTI;
2) 04:40 pm: departure of the shuttle bus from DonPhTI and than departure from the airport after people from the flights 04:55 pm and 05:10 pm arrives;
3) 06:10 pm: departure of the shuttle bus from DonPhTI and than departure from the airport after people from the flights 06:30 pm and 06:55 pm arrives;
To those participants who will go to the hotel on one's own we strongly recommend to take a taxi. The taxi from Donetsk to the conference hotel in Sv'yatogorsk should cost about 200 UAH (40 USD).
1400 - 2200: Reception at the conference hotel. Participants' Registration.
First Day (Sept. 23, 2004)
a.m. - MECHANICAL BEHAVIORS
(Chairman - Viktor Varyukhin, Yuntian T. Zhu)
900 - 910: ARW opening remarks
910 - 935: Cheng Xu1, Minoru Furukawa2, Zenji Horita3 and Terence G. Langdon1, 1Departments of Aerospace & Mechanical Engineering and Materials Science, University of Southern California, Los Angeles, U.S.A.; 2Department of Technology, Fukuoka University of Education, Munakata, Fukuoka, Japan; 3Department of Materials Science and Engineering, Faculty of Engineering, Kyushu University, Fukuoka, Japan,
"The deformation characteristics of pure aluminum processed by equal-channel angular pressing"
935 - 1000: Yan Beygelzimer, Donetsk Phys.&Tech. Institute of the NAS of Ukraine, Donetsk, Ukraine,
"Grain Refinement and Viscous Fracture of Metals at Severe Plastic Deformation"
1000 - 1025: Sergey A. Firstov, Frantcevych Institute for Problems of Materials Science of the NAS of Ukraine, Kiev, Ukraine,
"Ultimate structural States of Metals and their ultimate mechanical Properties"
1025 - 1040: Ibrahim Karaman1, G. Guven Yapici1, Yang Cao1 and Zhiping Luo2, 1Texas A&M University, Dept. of Mech. Eng., College Sta., USA; 2Texas A&M University, Microscopy & Imaging Ctr., College Sta., USA,
"Microstructure and Mechanical Behavior of Severely Deformed 316L Stainless Steel Polycrystals and Hadfield Steel Single Crystals"
Coffee-Break
1100 - 1125: Amiya K. Mukherjee, Nathan Mara, Alla V. Sergueeva, Department of Chemical Engineering & Materials Science, University of California, One Shields Avenue, Davis, USA,
"Elevated Temperature Deformation Characteristics"
1125 - 1150: Yu. M. Podrezov, Frantcevych Institute for Problems of Materials Science of the NAS of Ukraine, Kiev, Ukraine,
"Structural sensitivity of mechanical properties for nanocrystalline materials"
1150 - 1215: Nobuhiro Tsuji, Dept. of Adaptive Machine Systems, Osaka University, Suita, Japan,
"Unique Deformation Behaviors of the Ultrafine Grained Aluminum Alloys Fabricated by Accumulative Roll Bonding"
1215 - 1230: P. Gabor, N. Gupta, H. J. Maier, I. Karaman, LWK, University of Paderborn, Paderborn, Germany,
"Fatigue Behavior of Ultrafine Grained Copper"
p.m. - MECHANICAL AND THERMAL PROPERTIES
(Chairman – Ruslan Z. Valiev, Michael J. Zehetbauer)
1400 - 1425: Viktor Varyukhin, Donetsk Phys.&Tech. Institute of the NAS of Ukraine, Donetsk, Ukraine
"High Pressure Effects
and Large Plastic Deformation"
1425 - 1450: Terry C. Lowe, Los Alamos National Laboratory, Los Alamos, USA,
"Comparison of Alternative Routes to Producing Bulk Nanostructured Metals"
1450 - 1515: K.T. Hartwig and S.N. Mathaudhu, Texas A&M University, Department of Mechanical Engineering, College Station, USA,
"Microstructural Refinement of Bulk Nb and Ta by Severe Plastic Deformation for Composite Superconductor Applications"
1515 - 1530: N.Ammannati2, P.Cavaliere1, E. Cerri1, P. Leo1 and E.Martellucci2 1INFM-Dept. of Ingegneria dell Innovazione, Engineering Faculty, University of Lecce, Lecce, Italy; 2Research Centre Europa Metalli, Fornaci di Barga (LU);
"Microstructural and mechanical evolution of ultra-pure copper processed by ECAP"
1530 - 1545: Vladimir Stolyarov, Valiev R.Z. et all, Ufa State Aviation Technical University, Ufa, Russia,
"Structure and properties of Ti-based alloys processed by ECAP"
1545 - 1600: M. Berta, P.J. Apps, and P.B. Prangnell, Manchester Materials Science Centre, University of Manchester/UMIST, Manchester, UK
"Effect of second phase particles on grain growth kinetics of ultrafine grained aluminium alloys produced by ECAE"
Coffee-Break
1620 - 1645: Hael Mughrabi, Heinz Werner Höppel and Martin Kautz, Institut für Werkstoffwissenschaften, Universität Erlangen-Nürnberg, Erlangen, Germany,
"Microstructural Aspects of Fatigue Strength and Ductility of Ultrafine-Grained Metals"
1645 - 1710: Yu. R. Kolobov, Aleksei Lipnitskii,Institute of Strength Physics and Materials Science, SB RAS, Tomsk, Russia,
"Grain boundary diffusion and plasticity of polycrystalline and nanostructured metals and alloys"
1710 - 1735: Z. Mroz1 and A. Baltov2, 1Institute of Fundamental Technological Research, Warsaw, Poland; 2Institute of Mechanics, Sofia, Bulgaria,
"Modeling hardening effects and grain size evolution in metals induced by severe plastic deformation"
1735 - 1750: D. Orlov1, Y. Beygelzimer1, A. Reshetov1, Yu. Milman2, D. Lotsko2, O. Sirko2, V. Voropaiev2, 1Donetsk Phys.&Tech. Institute of the NAS of Ukraine, Donetsk, Ukraine; 2Frantcevych Institute for Problems of Materials Science of the NAS of Ukraine, Kiev, Ukraine,
"Influence of Loading Path During SPD on Al-Mg-Sc-Zr Alloys Structure and Properties"
1750 - 1805: Alexander Zhilyaev, Naval Postgraduate School, Monterey, USA,
"The Microstructural Characteristics Of Ultrafine-Grained Nickel"
Second Day (Sept. 24, 2004)
a.m. - NANOMATERIAL FUNDAMENTALS
(Chairman - Terence G. Langdon and Zenji Horita)
900 - 925: Yuntian T. Zhu, Los Alamos National Laboratory, Los Alamos, USA,
"Deformation Mechanisms of Nanostructured Materials"
925 - 950: Vladimir Kopylov1, Vladimir Chuvildeev2; 1Physico-Technical Institute of the National Academy of Sciences of Belarus, Minsk, Belarus; 2Nizhny Novgorod State University, Nizhny Novgorod, Russia
"Ultimate Grain Refinement by ECAP: Experiment and Theory"
950 - 1015: G.A. Salishchev, Institute for Metals Superplasticity Problems of the Russian Academy of Sciences, Ufa, Russia,
"Mechanisms of submicron grain formation in titanium and two-phase titanium alloy during large strain warm working"
1015 - 1030: Nina Noskova, Institute of metal physics, Russian Academy of science, Ural branch, Ufa, Russia,
"Structural Features, Strength, and Mechanisms of Deformation of Nanocrystalline Materials"
Coffee-Break
1050 - 1115: Zenji Horita1, Takeshi Fujita1, Kenji Kaneko1 and Terence G. Langdon2, 1Department of Materials Science and Engineering, Faculty of Engineering, Kyushu University, Fukuoka, Japan; 2Departments of Aerospace & Mechanical Engineering and Materials Science, University of Southern California, Los Angeles, U.S.A.,
"Precipitation behavior in age-hardenable alloys after severe plastic deformation"
1115 - 1140: M. Shtern, V. Skorokhod, A. Ragulya, Frantcevych Institute for Problems of Materials Science of the NAS of Ukraine, Kiev, Ukraine,
"Straining Path Effect on Coarsening Control and Pore Distribution During Sintering of Nano - Materials"
1140 - 1205: V.V. Novikov, Odessa National Polytechnical University, Odessa, Ukraine
"Viscoelastic Properties of Inhomogeneous Nanocomposites"
1205 - 1220: Marcello Cabibbo, Enrico Evangelista, Dipartimento di Meccanica - Universita' Politecnica delle Marche, Ancona, Italy
"Deformation mechanisms inducing microstructure refinement in commercially pure aluminium processed via ECAP: comparison to Cold-Rolling and Hot-Torsion"
p.m.
1430: Tour Orthodox Monastery and surrounding area
1830: Workshop Banquet
3rd day (Sept. 25, 2004)
a.m. - PROCESSING AND TECHNOLOGY
(Chairman - Amiya K. Mukherjee, Nikolay V. Novikov)
900 - 925: Ruslan Z. Valiev, Inst. of Physics of Advanced Materials, Ufa State Aviation Technical University, Ufa, Russia,
"Applications of Severe Plastic Deformation for Materials Nanostructuring Aimed at Advanced Properties"
925 - 950: S.V. Dobatkin1, L.Lev2, R. Verma2, 1Moscow State Institute of Steel and Alloys (Technological University), Moscow, Russia; 2General Motors Corporation, Warren, Michigan, USA,
"Development of Continuous Processes of Severe Plastic Deformation for Strip Production"
950 - 1015: Yuri Estrin1, Eugen Rabkin2, Ralph Hellmig1, M. Kazakevich2 and Aikaterini Zi1, 1Institute of Materials Science and Technology, Clausthal University of Technology, Clausthal, Germany; 2Department of Materials Engineering, Technion, Haifa, Israel,
"New Applications of the SPD concept: mSPD"
1015 - 1030: A.Babushkin, O.Savina, I.Sukhanov, Ural State University, Ekaterinburg, Russia,
"Application of diamond anvils techniques for studying nanostructure formation in massive materials directly during severe plastic deformations"
Coffee-Break
1050 - 1115: Michael J. Zehetbauer1, L. Zeipper1,2, E. Schafler1; 1Institute of Materials Physics, University of Vienna, Wien, Austria; 2Austrian Research Center Seibersdorf GmbH, Seibersdorf, Austria;
"Modelling Mechanical Properties of SPD Materials during and after Severe Plastic Deformation"
1115 - 1140: Hyoung Seop Kim, Department of Metallurgical Engineering, Chungnam National University, Daejeon, KOREA,
"Process Modelling of Equal Channel Angular Pressing for Ultrafine Grained Materials"
1140 - 1205: O. Lyeshchuk, Nikolay V. Novikov, O. Borimsky, Institute of Superhard Materials of the NAS of Ukraine, Kiev, Ukraine,
"Advancement of equipment and technology of superhard materials synthesis in solid-state high pressure apparatuses"
1205 - 1220: Tatjana Konstantinova, Donetsk Phys.&Tech. Institute of the NAS of Ukraine, Donetsk, Ukraine;
"Mesoscopic mechanisms of fragmentation at severe plastic deformation"
1220 - 1235: M.R. Shagiev, G.A. Salishchev, Institute for Metals Superplasticity Problems of the RAS, Ufa, Russia,
"Low-Temperature Sheet Rolling of TiAl Based Alloys"
p.m.
1400 - 1530: Poster session
Coffee-Break
1600 - 1800: Round-table discussion, Moderator: Viktor Varyukhin, Yuntian T. Zhu
Note: This will be free style. Anyone in the audience can raise a question and answer someone else's question.
4th day (Sept. 26, 2004)
a.m.
Departure of participants.
p.m.
Poster Section
P-01. Yu. Bazhenova; Institute of Physics of Advance Materials, Ufa state Aviation Technical University, Ufa, Russia;
"Insitute of Physics of advanced materials USATU: International Cooperation in the field of nanostructured materials produced by SPD"
P-02. V. Bengus1, S. Smirnov1, E. Tabachnikova1, V. Romanchenko1, V. Natsik1, D. Gunderov2, V. Stolyarov2, R. Valiev2; 1B. Verkin Institute for Low Temperature Physics & Engineering, NASU, Kharkov, Ukraine; 2Institute of Physics of Advanced Materials, Ufa State Aviation Technical University, Ufa, Russia;
"Nanostructured Titanium Anomalies Of Plasticity Under Cooling From 300 Down To 4,2 K"
P-03. Varyukhin V.N., Belousov N.N.; Donetsk Phys.&Tech. Institute of the NAS of Ukraine, Donetsk, Ukraine;
"Structural-Kinetic Approach To Produce Nanostructural Materials By High Pressure Torsion"
P-04. I.G.Brodova1, V.V.Stolyarov1, R.Lapovok2; 1Institute of Physics of Advance Materials, Ufa state Aviation Technical University, Ufa, Russia; 2School of Physics and Material Engineering, Monash University;
"Structure and properties of Al-Fe alloy by ECAP with backpressure"
P-05. V.D. Blank, S.G. Buga, G.A. Dubitsky, V.M. Prokhorov; Federal State Institution Technological Institute for Superhard and Novel Carbon Materials, Troitsk, Russia;
"Sintering of metal-coated diamond powders with fullerenes at nonhydrostatic HPHT"
P-06. M. Sus-Ryszkowska1, A. Druycka-Wiencek1, R. Kuziak2, J.Pawlicki3, F.Grossman3, K.J.Kurzydlowski1; 1Warsaw University of Technology, Faculty of Materials Science and Engineering, Warszawa, Poland; 2Institute for Ferrous Metallurgy, Silesian University of Technology, Poland; 3Department of Process Modeling and Medical Engineering, Silesian University of Technology, Poland;
"Properties and microstructure of 316LVM steel subjected to severe plastic deformation by Max Strain and transverse rolling"
P-07. N.B. Efros1, L.G.Korshunov2, B.M.Efros1, N.L.Chernenko2; 1Donetsk Phys.&Tech. Institute of the NAS of Ukraine, Donetsk, Ukraine; 2Institute of Metal Physics RAN, Ekaterinburg, Russia;
"Surface nanostructure and tribological properties of metallic materials"
P-08. B. M. Efros1, V.A. Ivchenko2, N.B. Efros1, E.V. Popova2, L.V. Loladze1, T.P. Zaika1; 1Donetsk Phys.&Tech. Institute of the NAS of Ukraine, Donetsk, Ukraine; 2Institute of Electrophysics of RAN, Ekaterinburg, Russia;
"Structure and hardening of ultrafine grained nickel after severe plastic deformation"
P-09. A.A. Nazarov1, N.A. Enikeev1, A.E. Romanov2, T.S. Orlova2, I.V. Alexandrov1, I. J. Beyerlein3; 1Institute of Physics of Advanced Materials, Ufa State Aviation University, Ufa, Russia; 2Ioffe Physico-Technical Institute, Russian Academy of Sciences, St.Petersburg, Russia; 3Los Alamos National Laboratory, Los Alamos, USA;
"Modeling of grain subdivision during severe plastic deformation by VPSC method combined with disclination analysis"
P-10. R.K.Islamgaliev1, N.F.Yunusova2, R.Z.Valiev2; 1Institute of Mechanics Russian Academy of Sciences, Ufa, Russia; 2Institute of Physics of Advanced Materials, Ufa State Aviation Technical University, Ufa, Russia;
"The influence of the SPD regimes on the superplastic behavior of aluminum alloys"
P-11. Dominika Klassek1, Halina Garbacz1, Malgorzata Lewandowska1, Waclaw Pachla2, Krzysztof J. Kurzydlowski1; 1Division of Materials Design, Faculty of Materials Science and Engineering, WUT, Warsaw, Poland; 2High Pressure Research Center, Polish Academy of Sciences UNIPRESS, Poland;
"The influence of hydrostatic extrusion on microstructure and mechanical properties of austenitic stainless steel for biomedical applications"
P-12. Alexander Korshunov; RFNC-VNIIEF, Technology Division, Sarov, Russia;
"Response of mechanical properties along the workpiece section to ECA-pressing"
P-13. B.M.Efros1, V.P. Pilyugin2, A.M. Patselov2, S.V. Gladkovskii3, N.B. Efros1, L.V. Loladze1; 1Donetsk Phys.&Tech. Institute of the NAS of Ukraine, Donetsk, Ukraine; 2Institute of Metal Physics of the RAN, Ekaterinburg, Russia; 3Ural State Technical University, Ekaterinburg, Russia;
"Martensitic transformations in nanocrystalline Fe-Cr-Ni and Fe-Mn alloys"
P-14. Varyukhin V.N.1, Pashinskaya E.G.1, Pashinsky V.V.2, Tkachenko V.M.1, Tishenko I.I.1; 1Donetsk Phys.&Tech. Institute of the NAS of Ukraine, Donetsk, Ukraine; 2Donetsk National Technical University, Donetsk, Ukraine;
"Changes in copper submicrostructure as a result of combination twist extrusion and conventional metal forming processes"
P-15. Y.E. Beygelzimer, V.N.Varyukhin, O.V. Prokofyeva, B.M. Efros; Donetsk Phys.&Tech. Institute of the NAS of Ukraine, Donetsk, Ukraine;
"Grain Refinement And Failure Of Metal Materials Under The Large Plastic Deformations: Prerequisites For Modelling"
P-16. Beygelzimer Y, Reshetov A., Synkov S., Orlov D., Synkov A.; Donetsk Phys.&Tech. Institute of the NAS of Ukraine, Donetsk, Ukraine;
"Foundations of manufacturing technology of long size ultra-fine grained bar profiles based on twist, spread and direct extrusion processes"
P-17. T.Ryumshyna, T.Konstantinova, G.Volkova; Donetsk Phys.&Tech. Institute of the NAS of Ukraine, Donetsk, Ukraine;
"Evolution of structure and mechanical properties in Ti-alloy at high pressure deformation"
P-18. I.P. Semenova, G.I. Raab, L.R. Saitova, R.Z. Valiev; Institute of Physics of Advanced Materials, Ufa State Aviation Technical University, Ufa, Russia;
"Ti-6Al-4V alloy mechanical properties enhancement by means of severe plastic deformation"
P-19. I.P. Semenova1, V.V. Latysh2, G.H. Sadikova1, R.Z. Valiev1; 1Institute of Physics of Advanced Materials, Ufa State Aviation Technical University, Ufa, Russia; 2Scientific Design Technical Office "Iskra", Ufa, Russia;
"Microstructure and mechanical properties of long-sized semi-finished articles with ultrafine-grained structure"
P-20. Beygelzimer Y., Synkov S., Orlov D., Reshetov A., Synkov A.; Donetsk Phys.&Tech. Institute of the NAS of Ukraine, Donetsk, Ukraine;
"Technological Aspects Of Twist Extrusion"
P-21. E. Tabachnikova1, V. Bengus1, V. Natsik1, K. Csach2, J.Miskuf2, D.Gunderov3, V. Stolyarov3, R. Valiev3; 1B. Verkin Institute for Low Temperature Physics & Engineering, Kharkov, Ukraine; 2Institute of Experimental Physics, Kosice, Slovakia; 3Ufa State Aviation Technical University, Ufa, Russia;
"Low Temperature Deformation And Failure Of Nanostructured Ti-6Al-4V Alloy"
P-22. N.V. Tokiy, V.N. Varyukhin, T.Ye.Konstantinova; Donetsk Phys.&Tech. Institute of the NAS of Ukraine, Donetsk, Ukraine;
"Dislocation Model Of Local Bend"
P-23. Pawel Widlicki1, Halina Garbacz, Malgorzata Lewandowska, Waclaw Pachla2, Krzysztof J. Kurzydlowski; 1Warsaw University of Technology, Warsaw, Poland; 2High Pressure Research Center, Warsaw, Poland;
"Microstructure and mechanical properties of 6082 aluminum alloy processed by hydrostatic hydroextrusion"
P-24. A.Yurkova, A.Bilots'ky, A.Byakova; 1National Technical University of Ukraine, "Kiev Polytechnic Institute", Kiev, Ukraine; 2Frantcevych Institute for Problems of Materials Science of the NAS of Ukraine, Kiev, Ukraine;
"Anomalous Nitrogen Solubility in Gradient Nanostructured Layer Formed in the Surface of Bulk Iron by Severe Plastic Deformation under Friction"
